User Manual

1. Connect the AC power cord
1
to the quick charger, and plug it
into a wall outlet. The LED
2
will
turn green to indicate that it is
receiving power.
2. Connect the DC battery charge
cable
3
to the VE-TTLBAT
battery. The LED
2
will turn
red to indicate that the battery
is charging. Charge time is
approximately 3.2 hours.
3. When the battery is fully charged,
the LED
2
will turn green.
Disconnect the battery and install
it in your Venture TTL monolight.
Instructions
1
2
3