User Manual

24
2. Repeatedly press the COMMAND dial to scroll through the modeling light
modes.
3. When the mode you want is displayed, press the SOUND/FN button to
select the mode and return to the main screen.
Setting the modeling light (F3-0 and F3-1 only):
1. Press the MODEL button to turn on the modeling light. The modeling light
power output will be displayed in the modeling light power indicator.
2. Press and hold the MODEL button while rotating the COMMAND dial
to change the power output from 100% (highest) to 10% (lowest). The
modeling light brightness will change as you adjust the power.
Setting the modeling light (F3-2 and F3-3 only):
1. Press the MODEL button to turn on the modeling light. AU will be displayed
in the modeling light power indicator.
2. Rotate the COMMAND dial to increase or decrease the ash power output.
The modeling light brightness will increase or decrease incrementally as
you change the ash power output setting.
Setting the Modeling Light (continued)