User Manual
19
The Venture TTL 600 defaults to manual mode when rst powered on. Your last
settings will appear on the LCD screen. In this mode, you can set all of the ash
parameters on the back panel.
Setting the Flash Mode
The Venture TTL 600 features two ash modes: Quick and Power.
F4-1 - Quick Mode (default): Power is reduced for the benet of a fast, 1.2 sec.
recycle rate, and faster ash duration. The color temperature is 5500 K ±50 K
throughout the power range of 1/1 to 1/128.
F4-2 - Power Mode: Recycle speed is slightly longer for the benet of gaining
power. Power mode will increase the power output over Quick mode by one
stop throughout the power range. The recycle rate at 1/1 power setting is 3 sec.
and recycle rates will decrease as the power is reduced. The color temperature
is 5600 K ±50 K throughout the range of 1/1 to 1/128 and ash durations are
minimally increased.
Setting the Flash Mode