User Manual
17
1. Move the power switch to the ON position.
2. You will hear a conrmation beep, and the charge indicator line ( ) will
move across the bottom of the LCD from left to right. When charging is
complete, there will be another beep, and the charge indicator will glow
red to conrm that the ash is ready to re.
3. To re a test ash, press the TEST button.
4. The indicator light will disappear while the Venture is recycling, and glow
red again when the unit is ready to re again.
Note: The Venture TTL 600 powers on to manual mode, and to the previous
personal ID number, channel, group, and power settings.
Powering the Monolight and Firing a Test