User Manual

16
Sync Cord
The back panel of your monolight has a 1/4″ (6.35 mm)
sync input for a wired connection to your camera or a
wireless receiver (other than the Venture TTL Wireless
Controller). Use the following steps to connect your
devices:
1. Insert a 1/4″ (6.35 mm) sync cable plug into the
Venture’s sync cable port.
2. Connect the PC connector to your camera’s PC
socket or to your wireless controller.
Note: Check your camera’s instruction manual for
connection help.
TTL Wireless
The Venture Monolight has three integrated 2.4 GHz wireless receivers for
Nikon, Canon, and Sony. Use the Venture TTL 600 transmitter to wirelessly
trigger your ash and control most of its functions remotely.
Note: Refer to the instructions that come with the Venture Wireless Controller
for information on how to operate your monolight in TTL mode.
Connecting Your Camera to the Venture TTL 600