User Manual

Important: Always leave the protective cap on until you are ready to use the

light, and remove it before turning on the monolight.

Mounting On a Light Stand

1. Loosen the light-stand locking knob, and place

the light-stand mount onto a standard 5/8″ spigot.

2. Tighten the locking knob until secure.

3. Make sure the angle adjustment locking knob is

also tight.

4. Align the monolight mounting threads with the

stand mount’s mounting screw, and turn the

locking wheel counterclockwise to fasten until

tight.

Mounting the Reector

1. Loosen the accessory locking knob.

2. Hold the reector with its umbrella socket at the

six o’clock position. Guide the reector by its

slots onto the monolight’s mounting pegs, then

rotate the reector clockwise to hold.

3. Tighten the accessory mount lock until secure.

Preparing for Use