User Manual

Thank you for choosing Impact.

The Impact VE-CBA2 adapter makes the Venture TTL-600 monolight compatible with

most ash-head accessories that have Bowens mounts. The adapter is easy to add

to the TTL-600’s integrated comet mount and securely locks into place in seconds.

1. Unscrew the Venture’s accessory locking knob and set it aside.

2. Align the Venture’s mounting pegs with the slots on the inner ring of the adapter.

3. Fit the adapter onto the Venture TTL-600. Twist it clockwise until it stops.

Note: You may need to pull out locking

knob to make sure the adapter ts

snuggly onto the Venture’s comet mount.

4. Screw the locking knob into the

threaded hole at the top of the Venture

TTL-600. Make sure the locking knob

screws completely into the hole so the

washer is ush against the adapter.

To remove the adapter: Unscrew the locking knob,

twist the adapter counterclockwise until it stops, and slide the adapter off of the Venture.

Instructions

Attaching the adapter