User's Manual

7
Operation
Adjusting the Flash Power
The ash power output is variable over a ve f-stop range from 1/1 (full power)
to 1/16. Turn the power adjustment dial to set the ash brightness that’s perfect
for your exposure.
Triggering the Flash
There are three ways to trigger the ash: pressing the Test button, with a sync
connection, and activating the optical slave.
Test Button
When the recycle indicator is green, trigger the ash by pressing the Test
button. The indicator light will turn red until the battery has recycled.
Triggering the ash is useful when you need to discharge the power built up in
the ash unit, for example just before replacing the ash tube.
Sync Connection
Use the sync jack on the back of the SF-ABRL180 to connect the monolight to
your camera. Triggering the camera will re the ash.
The sync jack can also be used to attach a wirelesss receiver for remote ash
operation.