Speed Ring Flash Bracket for QuikBox INSTRUCTIONS
Introduction Thank you for choosing the Impact Speed Ring Flash Bracket for Quikbox. This is a replacement bracket for the Impact Quikbox. This bracket can be used to mount an Impact Quikbox softbox to a flash in a variety of configurations. The bracket is adjustable vertically and features a universal shoe that is adjustable horizontally. This bracket is compatible with nearly all standard flash units, including the Nikon SB-900 and SB-910.
Instructions To assemble the Speed Ring Flash Bracket, loosen Thumbscrew C. With the light stand mount (Thumbscrew A) below Thumbscrew C, align the flanges of the bracket with the guide controlled by Thumbscrew C and slide the bracket into the mounting apparatus. Adjust the height to the desired position and tighten Thumbscrew C. Directions for mounting the Impact Quikbox to the Speed Ring Flash Bracket are included with the Quikbox.
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
