User Manual

21
Using as a Camera Trigger (Continued)
Wireless Bulb Mode (Long Exposure):
1. Turn off all devices.
2. Connect the receiver to the camera using the appropriate shutter
release cable.
3. Synchronize the channels on the transmitter and receiver.
4. Turn on the transmitter, receiver, and camera.
5. Set the camera to Bulb mode.
6. Half-press the Test/Shutter Release button on the transmitter to auto-
focus the camera. The camera and lens must be set to auto-focus for
this function to work.
7. Press and hold the Test/Shutter Release button on the transmitter to
trigger the camera’s shutter. The shutter will stay open as long as you
hold the button down. Release the button to close the shutter.