User Manual

19
Wake-Up Feature
3. Synchronize the channels on the transmitter and receiver.
See channel selection instructions on page 12.
4. Turn on the camera, transmitter, receiver, and studio ash.
5. Press the shutter release button on the camera or the test
button on the transmitter to trigger the ash.
NOTE: A household male to 1/4” female adapter is available
separately.
Wake-Up Feature
Some devices will enter sleep mode after a period of inactivity. If the
ash has a wake-up function, the Impact PowerSlave system has an
easy-to-use function that wakes up the ash after it has entered sleep
mode.
To wake up a device, half-press the camera’s shutter release button.
TIP: If the ash does not have a wake-up function, the sleep mode
may have the option to be disabled. Refer to your ash’s manual for
instructions.