PT-100 Posing Table ASSEMBLY INSTRUCTIONS
Instructions 1. 2. 3. four screws and mounting bracket from the tabletop with a PH3-size Phillips screwdriver. of the riser. Hold the column in one hand, and seat the mounting bracket’s pin holes— threaded socket, and use the hex key to tighten until secure. 4. the mounting bracket with the holes in the tabletop. Fasten all four screws until secure. Do not overtighten. Tip: Insert all four screws before tightening. 5. Stand the pedestal base on the casters, and lock all casters.
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
