User Manual

Thank you for choosing Impact.
The Impact Pivot Arm 20˝ with Locking Lever is a strong mounting
arm with an elbow pivot joint that securely attaches cameras,
lighting gear, or brackets while being attached to any baby receiver
adapters or super clamps. With its single stroke quick-action control
lever, the pivot arm can quickly and securely be locked into place.
Whether needing a unique angle or in a space where conventional
tripods cannot be used, this 360° pivot arm with ball and socket
positioning baby pins is a great addition to your grip kit.
The intra-locking lever easily freezes the position of the pivot arm,
after you’ve determined the ideal connections and placements. You
can use the Impact Pivot Arm 20˝ with locking lever in the studio or
on location to put your equipment just about anywhere.
There is further control of the pivot locking mechanism and rotatable
baby pins with the lever set screws for micro adjustment of the
tension throughout the unit. Either of the two female threaded baby
pins enable the connection to a variety of devices with 1/4˝-20 and
3/8ʺ threads while offering the ability to attach the arms to super
clamps or other mounting gear with baby 5/8˝ receivers.
Introduction Overview
1
3
2
1
Intra-locking Lever
Internally locks pivot arms and baby pins
in position with quick-locking mechanism.
2
Rotary pivot joint
Rotates 360° for all-around positioning.
3
Lever set screws
Adjust tension of the intra-locking lever when
used with included Allen keys.
Warning!
Do not force lever in
opposite direction.
4
Threaded Baby Pins
Each baby pin is affixed to a ball and socket, allowing for flexible
movement and accurate positioning of the gear attached.
Connect many types of lighting and camera equipment
with 1/4˝-20 or 3/8˝ female threads.
Ideal for use with super clamps.
Flat-sided baby pins help to prevent the pivot
arms from rotating in any baby receiver.
4 3
4