User Manual

12
Safety and Maintenance
Safety Notes
• Turn the power OFF and unplug the power cord when the light is not in use
• Do not use the light in an environment where moisture may come in contact with the unit
• A re hazard exists if ammable materials are placed in close proximity to the lamps
• Do not use your light in an environment where ammable vapors are present
• Do not restrict the ventilation holes when the light is in use
• Always switch OFF the power and disconnect the power cord before removing or
replacing any lamp(s)
• Avoid placing cables where they can be tripped over
• Replace damaged cords immediately
• Never use a light head with damaged covers, moldings, or lamps
• If the unit is dropped or damaged, have it checked by a professional repair service
before using
• Due to the high-voltage circuitry inside this device, do not attempt to disassemble or repair
the unit yourself
• Keep out of the reach of children
Changing the Fuse
A 3.15A 250 V fuse is mounted in the rear panel and protects the circuitry of the light head.
Turn off the unit and disconnect the power supply before changing the fuse. Never replace
with a fuse of a different type or rating. A spare fuse is tted within the fuse holder. Use a small
screwdriver to release the fuse cover. Remove the old fuse, place the new fuse in the slot, then
replace the fuse holder.