User Manual

8
Luxbanx Assembly Instructions
NOTE: The first time you use your Luxbanx Duo softbox with a hot light,
there may be a slight odor and a small amount of smoke. This is a result of
manufacturing residue burning off, and it should only last for a minute or
two.
An optional Luxbanx grid provides
more control over the light of your
softbox by producing a narrower
beam of light than the softbox
alone.
When using the optional Luxbanx
Grid, be sure to install the softbox
front diffuser at the rear edge of the
softbox touch fastener strip. This
will allow enough of the softbox
touch fastener strip to be visible
so that there is room to install the
Luxbanx grid at the front edge of
the touch fastener strip. Press the
grid’s touch fastener firmly against
the softbox’s touch fastener strip
as smoothly as possible along
the length of one side. Repeat for
the remaining sides of the grid,
attaching sides in opposite pairs.