User Manual

6
5. For octagonal softboxes,
continue in the same manner,
always working in opposite
pairs.
NOTE: the second pair of
flex rods installed should be
at a 90° orientation from the
first pair so that a square
framework is established.
6. Fold the flaps of the softbox
shell over the speed ring and
press down on the touch
fasteners to close the back
of the softbox. If you’re using
a hot light (quartz, tungsten,
HMI, etc.), make sure to open
the four vents on the sides of
the softbox.
Luxbanx Assembly Instructions