User's Manual

6
6. Attach the remaining rods,
always placing one ex rod,
and then the next on the
opposite side. Once all the ex
rods are in place the fabric of
the Octa Softbox should be
stretched tight and the softbox
should keep its shape.
7. Screw in all the uorescent
bulbs. Only touch the base of
the bulb; never touch the glass
itself.
8. Stretch the diffuser around the
opening of the softbox. Press
down on the touch fasteners
to seal it.
9. At this point you can mount
the light xture and softbox
assembly on to a light stand.
Use a sandbag or other weight
to stabilize the assembly.
Assembly Instructions