User's Manual

Assembling the Octa Softbox 24 with the FF-OF4

Fluorescent 4-socket xture

Note: light stands, light xtures, and bulbs are not included with this softbox

unless purchased as a kit.

1. Before assembling the FF-

OSB60 Octa Softbox, unplug

the FF-OF4 and remove all

uorescent lamps.

2. Unfold the softbox and run

the power cord of the FF-OF4

through the center of the

softbox from the inside out.

Position the retracted FF-OF4

inside the softbox and rst

move the locking knob and

receiver assembly through the

elastic ring. Then t the elastic

ring of the softbox around the

base of the xture. Make sure

that the ex rod sockets are

accessible from the inside of

the softbox.

Assembly Instructions