User's Manual

Operation

Assembly Instructions

1. Remove any bulbs from your xture and place the

xture on a at surface with the socket facing

up. Make certain that the xture is turned off and

unplugged.

2. Wrap the softbox skin loosely around the xture.

Align the ap seam with a rod locating slot in the

xture head. This slot will hold the last ex rod you

insert.

3. Insert one end of one of the ex rods into a rod

locating slot in the xture head. The 50×50 cm ex

rods have a stud end and a plain end. Insert the

plain end into the xture head.