User Manual

5
Instructions - Install the lights
Mounting on a light stand
1. Loosen the locking mount knob
at the bottom of the xture and
insert the xture onto the light
stand.
2. Tighten the locking knob
and make sure the xture is
securely attached to the light
stand.
3. To change the angle of your
lights, hold onto the handle
on the back of the xture and
loosen the locking tilt knob.
Tighten the tilt knob when you
have adjusted the angle of the
xture.
Important: The FF-OF4 should only be used with CFLs. Do not use
incandescent bulbs in this xture.
1. Screw each bulb into a light socket. Only touch the base of the
bulb; never touch the glass itself.