CC-118 Micro Clamp INSTRUCTIONS
Introduction Thank you for choosing Impact. The Impact CC-118 Micro Clamp features a baby (5/8 inch) receiver for mounting an item with a baby pin. Often used for attaching a lighting fixture to an overhead pipe or a vertical riser, this clamp is also suitable for many other uses in the studio and on location. Recommended Accessory • Impact CA-100 Double End Spigot with 1/4″-20 and 3/8″ Male Threads Visit our website at www.ImpactStudioLighting.com for more Impact accessories.
Specifications Maximum clamp tube size: 1.2 in. (30 mm) Receiver size: 5/8 in. Maximum load capacity: 5 lb. Warnings ⚠ • Please read and follow these instructions, and keep this manual in a safe place. • Handle the unit with care. • Clean the unit with a soft, dry cloth. • Keep this unit away from children. • Make sure everything is secure before proceeding. • Make sure the item is intact and that there are no missing parts. • Do not exceed the maximum load capacity.
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
