User Manual

ManualsBrandsImpact ManualsExtension Arms20" Pivot Arm with Camera Platform Kit

One-Year Limited Warranty

This IMPACT product is warranted to the original purchaser to be free

from defects in materials and workmanship under normal consumer use

for a period of one (1) year from the original purchase date or thirty (30)

days after replacement, whichever occurs later. The warranty provider’s

responsibility with respect to this limited warranty shall be limited solely to

repair or replacement, at the provider’s discretion, of any product that fails

during normal use of this product in its intended manner and in its intended

environment. Inoperability of the product or part(s) shall be determined by

the warranty provider. If the product has been discontinued, the warranty

provider reserves the right to replace it with a model of equivalent quality

and function.

This warranty does not cover damage or defect caused by misuse, neglect,

accident, alteration, abuse, improper installation or maintenance. EXCEPT

AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY

EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING

BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you

with specic legal rights, and you may also have additional rights that vary

from state to state.

To obtain warranty coverage, contact the Impact Customer Service

Department to obtain a return merchandise authorization (“RMA”) number,

and return the defective product to Impact along with the RMA number and

proof of purchase. Shipment of the defective product is at the purchaser’s

own risk and expense.

For more information or to arrange service,

visit www.impactstudiolighting.com

or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

IMPACT is a registered trademark of the Gradus Group.

GG1

Speciﬁcations

Construction: Aluminum alloy

Extended length: 20˝ (50.8 cm)

Folded length: 10˝ (25.4 cm)

Weight: 2 lb. (.91 kg)

Maximum load capacity: 8 lb. (3.6 kg)

Attachment: 5/8˝ (16 mm) stud with 1/4˝-20 female thread

5/8˝ (16 mm) stud with 3/8˝ female thread

Precautions ⚠

• Please read and follow these instructions, and keep this manual in a safe place.

• Handle the unit with care.

• Clean the unit with a soft, dry cloth.

• Keep this unit away from children.

• Make sure everything is secure before proceeding.

• Make sure the item is intact and that there are no missing parts.

• Do not exceed the maximum load capacity.

• All photos are for illustrative purposes only.

Pivot Arm 20˝ Adjustable

Wheel Lock Control

INSTRUCTIONS

Summary of content (6 pages)

PAGE 1
Pivot Arm 20˝ Adjustable Wheel Lock Control INSTRUCTIONS
PAGE 2
Introduction Thank you for choosing Impact. The Impact Pivot Arm 20˝ with Adjustable Wheel Lock Control is a strong mounting arm with an elbow pivot joint that securely attaches cameras, lighting gear, or brackets while being attached to any baby receiver adapter or super clamp. The adjustable wheel lock control varies the tension of the internal locking mechanism so small adjustments can be made without moving other parts of the unit.
PAGE 3
Overview 1 2 3 1 Adjustable wheel lock control Internally locks pivot arms and baby pins in position. If you need to adjust the position of the pivot arms or baby pins for optimal placement, loosen the adjustable wheel lock control just enough to make micro adjustments. When you have the correct position of the unit and your gear, tighten by twisting the adjustable wheel lock control and lock the pivot arm and baby pins in place. 2 Rotary pivot joint Rotates 360° for all-around positioning.
PAGE 4
3 3 Threaded Baby Pins Each baby pin is affixed to a ball and socket, allowing for flexible movement and accurate positioning of the gear attached. Connect many types of lighting and camera equipment with 1/4˝-20 or 3/8˝ female threads. Ideal for use with super clamps. Flat-sided baby pins help to prevent the pivot arms from rotating in any baby receiver.
PAGE 5
Specifications Construction: Aluminum alloy Extended length: 20˝ (50.8 cm) Folded length: 10˝ (25.4 cm) Weight: 2 lb. (.91 kg) Maximum load capacity: 8 lb. (3.6 kg) Attachment: 5/8˝ (16 mm) stud with 1/4˝-20 female thread 5/8˝ (16 mm) stud with 3/8˝ female thread Precautions ⚠ • Please read and follow these instructions, and keep this manual in a safe place. • Handle the unit with care. • Clean the unit with a soft, dry cloth. • Keep this unit away from children.
PAGE 6
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.