NR1 External Product Report V2.
NR1 Product Report Version 2.0 Rev. Date Changes 0.1 01.11.2019 Initial creation 1.0 04.11.2019 First version for external release 2.0 27.12.
NR1 Product Report Version 2.0 INDEX 1. Introduction ................................................................................................................................. 4 2. Compliance .................................................................................................................................. 4 3. Product Overview ........................................................................................................................ 4 3.1 Trackers ................
NR1 Product Report Version 2.0 1. Introduction This document provides a brief overview of the Nurvv Run product and the different components that it consists of. This document is intended for external regulatory and qualification organisations. 2. Compliance This device complies with part 15 of the FCC Rules.
NR1 Product Report Version 2.0 Figure 2: power button Both trackers operate in the ISM band (~ 2.4GHz – 2.5 GHz). The right tracker supports Bluetooth Low Energy (BLE) and ANT, whereas the left tracker only supports BLE. Additionally, the left tracker has a GPS receiver which receives signals in the 1.575GHz range and has an Rx sensitivity of -165dBm. During a run, the left and right tracker continuously exchange data over BLE in order to determine the user’s running metrics (e.g.
