Warranty Information

10x10 Impact Canopy Set up Instructions
Step 2:
Unfold the canopy top, making sure to locate the 4 corners of the
top. Grab the corners and pull over the frame.
Step 1:
With 1 or 2 people, gently pull the outer frame legs until the frames
is 3/4 open.
Step 3:
Take the canopy top corners and secure the top to the outside
corner of the canopy frame.
Step 4:
Pull the remaining corners into position, making sure that the peak
of the top is centered on the peak pole of the frame.
Step 5:
Lock each of the corner sliders into place by holding the top of the
frame leg with one hand and pushing the slider upward until the
thumb lock clicks into place.
Step 7:
On the inside of the canopy top. Secure the top with
the provided clips.
Step 8:
Adjust the frame legs to your desired height by raising each leg and
slowly sliding the inner leg into place until the thumb-lock clicks.
Repeat with remaining legs .
Step 6:
Once the slider clicks into place, pull the valance fabric down.
Step 9:
Secure your canopy with the spikes and ropes
provided or with Impact rubber weights or weight
bags.
Now enjoy your Canopy!