User guide

-17-
GB
5. Setupandoperation
5.1. Controlpanel
1 Bar display of values
2 Numerical display of values
3 Unit display of the currently selected
parameter
4 Display of the currently selected mode
5 key
6 key
7 key
5.2. Switchingthepumponandoff
When the pump is connected to the network for the rst time, it operates with
the factory settings in automatic mode.
With subsequent start-ups, the pump will operate with the last settings that
were set prior to its shut-down.
To switch the pump off, press and hold the key for 5 seconds, until OFF is
shown on the display. When the pump is switched off, the numerical display
shows OFF.
To turn the pump on, press the key briey.
5.3. Pumpfunctions
Key
Short press:
• Scrolling through parameters downwards when not changing parameter values,
• Scrolling through modes downwards when mode selection is selected,
• Changing parameters downwards when setting parameter values.
Long press:
• 3 seconds together with key to select night mode,
• 5 seconds to switch off the pump,
• 5 seconds together with and keys to restore pump to factory settings.