Instructions

QSG ×1
Screw Package ×1Positioning Map ×1
Camera ×1
Bracket ×1
Power Cable ×1
Battery ×1
Base Station ×1
Introduction
Note:
Press and hold the SYNC button for 8 s to reset the camera.
Press the SYNC button to pair with the base station.
Power Port
SYNC Button
The pattern of the LED indicator is included in the following table.
LED Indicator Status
Green light flashing
Green light quick flashing
Green light stay on for 10 s, then off
Red light stay on for 10 s, then off
Red light stay on for 1 s, then off
Sleeping mode
Run out of battery
Alarm is triggered
Instructed to wake
Reconnecting Wi-Fi
Waiting for pairing with the base station
Pairing succeeded
Pairing timeout
Reset completed
Off
Network Cable ×1
Camera
ListPacking
IntroductionBase station
Note:
Caution:
Press and hold the Reset button for 5 s to reset the base station.
You can connect USB drive to the USB port to record video.
Press the SYNC button to pair with cameras.
The base station might format the USB drive, be sure to backup your data.
Power Adapter ×1
Note:
The quantity of the camera and other accessories might vary with different
models, and the actual product shall prevail.
System Indicator
Power Indicator
SYNC Button
Reset Button
Power Port
USB Port
Ethernet Port
The pattern of the power indicator is included in the following table.
Power Indicator Status
Off
Blue light stay on
Not powered up
Powered up properly
The pattern of the system indicator is included in the following table.
System Indicator Status
Blue light flashing
Yellow light flashing
White light flashing
White light stay on for 10 s, then off
Red light stay on for 10 s, then off
White light stay on for 1 s, then off
White light quick flashing
Not powered up
Operating properly
Booting up
Waiting for network connection
Waiting for pairing with cameras
Pairing succeeded
Pairing failed
Reset completed
Firmware updating
Off
PIR Detector
Lens
LED Indicator
Built-in Mic
Photosensor
Green light on
Built-in Speaker
Device Status
Device Status
Device Status
Built-in Speaker
Version 1.0.2
Quick Start Guide
BatteryInstalling