Instruction Manual

1
1
3.3 
Never place the baby unit or the cord
within 3.3 ft of the crib.
Connect the small plug of power adapter to the
Baby unit and push the Micro USB to the end. Only
use the enclosed adapter (5V DC 1000mA). Press the
“POWER” button to turn on baby unit. You will see
green LED is turned on.
Connect the small plug of power adapter to Parent unit and push the connector
the end. Only use the enclosed adapter (5V DC 2000mA). Recommend charging
time of at least 3 hours before first time use.
Setup and use your digital video baby monitor
1
3
Installing Baby Unit
2
Place Baby Unit on a flat
surface, such as a desk or shelf
or mount the camera on a wall.
LED