IMO Technical Brochure
www.imopc.com
55
Emergency Shutdown Switch
The Emergency Shutdown Switch for both the FRS-01 and the FRS-02 is supplied with a 24VDC power supply suitable for up to 40 panel
operation. It is available with either a “twist-to-release”pushbutton or keylock pushbutton, both with LED indicator to signal FireRaptor supply
status (ON indicates the supply is live).
For larger installations, the Emergency Shutdown Switch is available in custom format with:
Contact IMO for further information on any of these options.
Larger power supply options for increased number of panels (FRS-01 & FRS-02)
Multi connection terminals for increased number of strings (FRS-01 & FRS-02)
Temperature monitoring unit with hardwire or mobile communication alarm signalling (FRS-02)
Technical Specication
Shutdown Control Cable 2x1mm
2
cable + Tyco SuperSeal 2-pole connector
Panel & String Cable 4mm
2
DC rated cable + MC4 type connector
DC Power Supply 24VDC suitable for up to 20 FireRaptor units (40 panels) - Input 90-264VAC
Maximum Input Power 700W (350W per panel)
Maximum Input Voltage 150V (75V per panel)
Maximum Input Current 12A
Maximum System Voltage 1500V
Input Protection Over voltage & transient voltage supression
Maximum Output Current 12A (99.5% eciency)
Dielectric Strength 1500VAC for 1 minute
Maximum Output Voltage 150V (75V per panel)
Output Protection Over voltage, over current & transient voltage suppression
Ambient Operating Temperature -30°C (-22°F) to +95°C (203°F)
IP Class Protection FireRaptor - IP68 (designed to comply with NEMA 4X), Emergency Switch - IP66 (designed to comply with NEMA 3R)
Casing FireRaptor - Flame retardant Polycarbonate - UL94-V0, Emergency Switch - Flame retardant ABS - UL94-HB
Weight (without cables) 300g (10.6oz.)
Panel Cable Length 120mm (4 “a”)
String & Control Cable Length 1800mm (70 “a”)
Standard Compliance EN61000, EN61646, EN61215, IEC 62716 draft C (NH
3
resistant), VDE-AR-E 2100-712, BS7671-712
11
16
7
8
43
125
75
125
125
75
125
FRS-ESW1 FRS-ESW1-K
Dimensions (mm)
100
104
30
FRS-01
Tolerance ±0.5mm
FRS-02 FRS-ESW2 FRS-ESW2-K