Quick Start Guide


Following the Wizard
The wizard is used primarily to let the Vortex learn the flight channel order, and R/C Tx mode (1, 2, 3, 4).
‘Left’ refers to moving the stick left, and ‘Back’ refers to moving the stick back towards you.

Follow the prompts,
ensuring that the correct
stick is moved each time.
As each control is
recognized, it’s name will
appear to the left of the
servo bar.

Take your time with this step, if the wrong stick movements are fed to the wizard, it will be difficult to
navigate the OSD to complete the setup.


Once the four primary flight
controls have been learned,
place the quad on a flat and
level surface and move the
right stick back. This will
calibrate the
accelerometer.
It is important that the quad
is level when this step is
performed, or the auto-level
flight modes will not
function correctly.






11

