Operation Manual

Lost Model Alarm
The Lost Model Alarm on the Vortex 230 Mojo  sounds when the quad is disarmed after landing, or if a receiver
failsafe occurs, this alarm can also be assigned to a switch from within the Betaflight Chrome app if desired.
The alarm is designed to be as simple as possible, without controls which could allow it to be accidentally
disabled, resulting in a lost quad, hence we suggest leaving it at the default setting.
The Touch’n’Race (TNR) Tag
The Touch’n’Race tag is located behind the plastic side-plate of the right-side of the quad (looking from the
back).
A TNR Wand or an NFC enabled Android phone with the NFC app may be used to not only query the video
transmission frequency before powering-up the quad, but also to set it to any of the supported channels before
powering up.
10