Operation Manual


Note that the camera tilt is adjustable. Loosen the two upper-screws and tilt the camera to the desired angle,
before re-tightening them.
Cool Feature Alert: The 150/180 Mini has a cool way to control the camera settings directly from the Vortex
OSD.
Lost Model Alarm
The Lost Model Alarm on the Vortex 150/180 Mini sounds when the quad is disarmed after landing, or if a
receiver failsafe occurs.
The alarm is designed to be as simple as possible, without controls which could allow it to be accidentally
disabled, resulting in a lost quad.
NOTE: The alarm is driven directly from the OSD on the 150/180 Mini. As of osd firmware version 10.0.0.41
it’s also possible to assign the beeper to a switch in Betaflight configurator.
11