User manual

2
Specifications
RF Output
Antenna Impedance 50 Ohms
Antenna Connector Surface Mounted U.FL, with replaceable U.FL to SMA pigtail
Power Output Linearly adjustable, < 1mW to > 600mW
2
Channels 40 standard, arbitrary using Race Wand
Pit Frequency User/Race Organizer Definable
Channel Change Glitching Eliminated using Auto-Glitch technology
Mechanical
Dimensions L=32mm x W=20mm x H=8mm
Weight 4g (Tx only without SMA pigtail)
Audio/Video
Connector JST-GH, 6-pin locking
Pinout Battery In, Gnd, +5V Out, Video, Audio, Telemetry (twin grounds on harness)
Modulation FM, Audio and Video
Audio Mono input, duplicated on subcarriers on 6.0 and 6.5MHz
1
TNR (Touch’n’Race)
Connector JST-GH, 4-pin locking
Power
Voltage 2s-4s HV LiPo
Power Consumption ~4W max. @ 600mW, ~1.9W @ 200mW
1
Mono audio duplicated on both audio subcarriers to eliminate noise in one channel of stereo
headphones at the (stereo) receiver.
2
Power limited by Tx temperature to extend transmitter lifetime. A hot transmitter (no airflow) will
reduce power until safe temperature is reached.