Instructions

6
Nbr of Pil(ot) Menu
Set the number of pilots in the heat. Each with a pre-programmed frequency and power level
Number of
Pilots
8
Joystick up/down to change the number of pilots in the heat. |
Press joystick to go back to the Fly menu.
Pilot Freq
Set the power level and frequency for each pilot in a heat. Note that this only needs to be done
once, to set-up frequency and power limits for each pilot in a heat. Use the Start Heat menu to
quickly program transmitters between heats.
Pilot #1 Freq\Pwr
Race CH1
5658MHz@ 25mW
Joystick right/left to change the band and channel.
Joystick up/down to change the power level.
Program button to move to the next pilot.
Press joystick to go back to the Fly menu.
Note: Using this feature you can increase power only on channels with high levels of external interference,
while leaving other pilots running lower power levels.
Status Menu
> Check Com.
Get Tx Ver
Get Temp.
About
Batt. Inf.