User Guide

ManualsBrandsimmax ManualsOutdoor Switchimmax NEO LITE Smart Outdoor Switch

TECHNICAL SPECIFICATIONS:

Power consumption: AC 120 - 240 50 Hz / 60 Hz

Maximum current: 16 A (3680W)

Protocol: Wi-Fi

Frequency: 2400MHz - 2483.5MHz

Maximum RF output power: WiFi: 20dBm

Mains standby power supply (Pnet): 0.5W

Wireless range: 30 m direct visibility, 10 m in built-up area

Operating temperature: -20°C to 60°C

Operating humidity: 20% - 80%.

Degree of protection: IP68

Dimensions: 135 mm x 62 x 40 mm

Weight: 120g

DOWNLOAD AND REGISTRATION

Scan QR code and download the Immax NEO PRO application

Or nd and install the Immax NEO PRO app in the App Store or Google Play.

- Launch the Immax NEO PRO app and click on “Register-Wat” to create your

your own account.

- When you are done registering, log in with your account.

PAIRING THE PRODUCT TO THE APPLICATION

Preparation: connect the Smart Switch to the power supply according to the infor-

mation on the product body and open the Immax NEO PRO app. Make sure you

are connected to the same WiFi network that the product will be connected to.

Perform a device reset - press the reset button on the product for more than

5 seconds. The LED light behind the device will start ashing rapidly.

In Immax NEO PRO, click on the Room tab and then the “+” button to add

the device. In the Immax NEO tab, select the product. Enter your WiFi network

access data and conrm. The product will then be paired and added to the

Immax NEO PRO.

Pair button

SAFETY INFORMATION

CAUTION: Keep out of reach of children. This product contains small parts,

which may cause suffocation or injury if swallowed.

WARNING: Every battery has the potential to leak harmful chemicals that can

damage skin, clothing or area where the battery is stored. To avoid the risk of

injury, do not allow any substance from the battery to come into contact with the

eyes or skin. Every battery may burst or even explode if exposed to re or other

forms of excessive heat. Take care when handling the batteries. To reduce the

risk of injury from mishandling the batteries, take the following precautions:

- Do not use different brands and types of batteries in the same device

- When replacing the batteries, always replace all the batteries in the device

- Do not use rechargeable or reusable batteries.

- Do not allow children to insert batteries without supervision.

- Follow the battery manufacturer’s instructions for proper battery handling and

disposal.

CAUTION: The product and batteries should be disposed of at a recycling

centre. Do not dispose of them with normal household waste.

CAUTION: To ensure safe use of the product, wires must be brought at the

installation site according to valid regulations. The installation must only be

carried out by an individual with the appropriate certication in the eld of

electronics. During installation or when a fault is detected, the power cable must

always be disconnected from the socket (in the case of direct connection, the

relevant circuit breaker must be switched off). Improper installation can damage

the product and cause injury.

CAUTION: Do not disassemble the product, electric shock may occur.

CAUTION: Use only the original power adapter provided with the product. Do

not operate the device if the power cord shows signs of damage. CAUTION:

Follow the instructions in the enclosed manual.

MAINTENANCE

Protect the device from contamination and soiling. Wipe the device with a soft

cloth, do not use rough or coarse materials.

DO NOT USE solvents or other aggressive cleaners or chemicals.

A Declaration of Conformity has been issued for this product. More information

can be found at www.immax.cz