Installation Instructions

MOBILE PHONE APP CONNECTION AND OPERATION
Built-in Wi-Fi module, this system can connect mobile phone through Android or IOS
APP, please check below for its setting.
1. Scan the QR code below to quickly install your
mobile app.
3. Enter mobile phone interface, turn on
Wi-Fi and connect Wi-Fi ID (default name
CVRDV_M5_*,"*"is system MAC address),
enter initial password: 12345678.
After the connection is successful, the
main interface Wi-Fi icon will change from
“ ” to “ ”.
2. In the main interface of the dash camera, short
press “ ” to enter the menu setting page, select
Wi-Fi, and set it to “open”. At this time, the Wi-Fi
name and password will be displayed on the main
interface, and the Wi-Fi icon will change from “ ”
to “ ”, as shown below.
Android IOS
Local Album
Picture folder
Setting
Recording mode
Capture mode
Video switch
Delete
Download to local album
Close
Front / middle / rear video switch
5. Click “ ” to enter the list of recorded videos,
click “Edit” to switch between front and back
video, download the video to the local, delete
videos in batches, etc. See the gure below.
4. Open mobile phone APP, user can check the
recording video and operate accordingly.
Start /stop recording
Video folder
Serial No.: 2020WGV030GD1029
Tap the icon “ ” in the main interface to proceed to the menu settings.
MENU SETTINGS
Stamp: Can set “ Date + logo / Date / Off ”. Movie Mode: Can set “
FHD30 / HD30”.
Exposure: Can set “
Up / Down”.
Wifi: Can set “on / off”.File playback: “Normal le” and “Event le” are optional.
Sound Record: Can set“on / off”. Beep: Can set “on / off”.
Volume:
Can set “ Up / Down”. Movie Clip Time: Can set “ 1min / 2mins / 3mins”.
Time Lapes (Optinoal): Can set “on / off”.
Turn on the “time lapses” video function. When the car is turned off and the machine is in the
ignition
disconnected state, the machine will prompt to enter the “time lapses” video. When the voltage is low, the
machine will stop recording automatically to avoid car engine can’t start properly because of low voltage.
When playing a video, it turns a long video of slow motion into a short video of fast motion, similar to fast
forward playback in movies. For example, when recording for 1 minute, the video is compressed to 1
second, and the recording for 1 hour is changed to 1 minute to play.
LCD Power Save: Can set “off / 1min / 3mins”.
After exiting the menu, the mirror will start to count the time once there are no operations. The screen
will auto turn off when it reaches the time you set.
Language: “ English/Simplied Chinese/Traditional Chinese”. (Languages may increase without notice)
Return Previous Next Conrm
Power Off: Can set “Never / 1min / 3mins”.
After exiting the menu, the mirror will start to count the time once there are no operations. The device
will auto turn off when it reaches the time you set.
Protect Level (G-sensor): Can set “Off / High / Middle / Low”.
With G-sensor function, dash camera can automatically save the video as event le when it detects
acceleration of gravity changes greatly. For example, when car crash happens. The event le will be
locked and cannot be overwritten in record cycle mode. It can only be manually deleted one by one or
formatted.
Parking Monitoring
(Optinoal): Can set “Off / High / Middle / Low”.
Turn on the parking monitoring function. When the car is turned off and the machine is in the ignition
disconnected state, the machine senses that the car is subject to an external collision. The machine
will power up to record 10 seconds of video and enter the sleep state after ten seconds.
Format SD-Card: If it’s not necessary to save the videos in card, user can delate all videos (both
normal video and event les) by formatting.
APP Download: Android version / IOS version / Built-in APP QR code.
Clock Setting: Can set “year/month/day”, “hour/min/sec”. System time can be marked on the video.
Delete files: Can delete “Normal ie” and “Event le” .
Flicker: Can set “50Hz / 60Hz”.
Each country has different supply frequency due to geographical reason. Standard frequency of dash
camera lens is constant 50Hz. When the supply frequency inconsistent with frequency standard the
image on the device will appear joggling phenomenon. At this point users should adjust Frequency to
consistent with supply frequency.
Reset Setup: After making a lot of custom settings,users can reset the device to the original factory
settings.