Instructions

10
English
4.1 Control of the menu
The settings are made by means of a menu to be
controlled via four buttons (
☞
table below and
menu structure on page 2).
UP DOWNMENU ENTER
Buttons Functions
MENU
– to select menu items (same function as
button UP)
– to return to the highest menu level
UP and
DOWN
– to select menu items
– to change settings
ENTER
– to call up menu items
– to save all of the settings
Select the desired operating mode (
☞
chapter
4.2 or 4.3) and set additional functions if required
(
☞
chapter 4.4).
4.2 Operation with a DMX controller
1) Set the spotlight to the operating mode
“DMX control”: Depending on the number
of DMX channels to be used for controlling the
spotlight, select either the menu item
(3-channel mode) or the menu item
(5-channel mode).
2) Call up the menu item selected ( or )
and set the DMX start address. For separate
control of all DMX-controlled units, each unit
must have its own start address. Example: If
the first DMX channel of the spotlight is to
be controlled by the light controller via DMX
address 5, set the start address on the spotlight
to 5. All other DMX channels of the spotlight
will be automatically assigned to the subse-
quent addresses.
Example: In the 5-channel mode with start ad-
dress5, the channels 1 to 5 are assigned to the
addresses 5 to 9. Address 10 is the next possible
start address available for the following DMX-con-
trolled unit.
It will now be possible to control the spotlight via
the DMX controller as desired.
Note: The address that has been set for one channel
mode ( or ) will also apply to the other chan-
nel mode.
4.2.1 DMX functions in the 3-channel mode
DMX value Function
Channel 1 Dimmer (total brightness)
0 – 255
dark  bright
Channel 2 Brightness of cool white
0 – 255
dark  bright
Channel 3 Brightness of warm white
0 – 255
dark  bright
4.2.2 DMX functions in the 5-channel mode
DMX value Function
Channel 1 Dimmer (total brightness)
0 – 255
dark  bright
Channel 2 Brightness of cool white
0 – 255
dark  bright
Channel 3 Brightness of warm white
0 – 255
dark  bright
Channel 4 Stroboscope
0 no stroboscope
1– 255
stroboscope: slow  fast
Channel 5
LED response time (see chapter 4.4.2),
temperature-controlled power limitation
(see chapter Kap. 4.4.1)
0 – 20 corresponds to setting in the menu
21 – 40 corresponds to setting in the menu
41 – 60 corresponds to setting in the menu
61 – 80 corresponds to setting in the menu
81 – 100 corresponds to setting in the menu
101 – 149 no function
150 – 155 power limitation off*
156 – 199 no function
200 – 205 power limitation on*
206 – 255 no function
* The function will only be activated / deactivated when the
DMX value remains set for 3 seconds.