Instructions
Table Of Contents
- Deutsch
- English
22
English
5) To activate the shade of white that has been
set:
a)
Press the button MENU repeatedly until the
display indicates again.
b) Press the button DOWN twice so that the
display indicates .
c)
Press the button ENTER. The display
changes to , , , ,
or .
d) Press the button UP or DOWN repeatedly
until the display indicates .
e) Press the button ENTER. If the display indi-
cates , the shade of white is activated;
if it indicates , use the button UP or
DOWN to set the indication to .
6) To be able to control the spotlight by DMX,
press the button MENU twice to return to the
highest menu level.
For independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected.
5.3 LED response time
LEDs immediately respond to a change of the
brightness setting. To simulate the slow response
of standard lamps, the response can be set in
four steps. For the 13-channel mode , the
setting is made via DMX channel 12 (
☞
Fig. 5).
When a different number of DMX channels is to
be used, make the setting as follows:
1)
Press the button MENU repeatedly until the
display indicates .
2) Press the button ENTER. The display indicates
, , , , or .
3)
Press the button UP or DOWN repeatedly until
the display indicates .
4) Press the button ENTER. The display indicates
the current setting:
= immediate response
= slightly slow response 1
= slow response 2
= slow response 3
= slowest response 4
Use the button UP or DOWN to select the
setting desired.
5) To be able to control the spotlight by DMX,
use the button MENU to return to the highest
menu level.
For independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected.
5.4 Resetting the spotlight
toitsfactory settings
The factory settings of the spotlight are as follows:
Menu
item
Function Factory setting
number of DMX channels
= 13 channels
max. brightness
white balance function
subaddress function
LED response time
= 100 %
= slowest
subaddress 01
11 shades of white factory settings
white balance
R = 255, G = 255,
B= 255
DMX / independent mode
or slave mode
= DMX / inde-
pendent operation
Fig. 12 Factory setting
To reset the spotlight to its factory settings:
1)
Press the button MENU repeatedly until the
display indicates .
2) Press the button ENTER. The display indicates
, , , , or .
3)
Press the button UP or DOWN repeatedly until
the display indicates .
4)
Press the button ENTER so that the display
indicates four entry positions (. . . .). Then press
the following buttons:
UP, DOWN, UP, DOWN.
Each time one of these buttons is pressed, an
asterisk ( ) will appear on the display.
5) To reset the settings, press the button ENTER
(the display briefly indicates ) or, to cancel
the procedure, press the button MENU.
6) To be able to control the spotlight by DMX,
use the button MENU to return to the highest
menu level.
For independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected.