Instructions
Table Of Contents
- Deutsch
- English
21
English
6-channel mode
DMX
channel
DMX
value
Function
1
000 – 255
basic brightness of red
2
000 – 255
basic brightness of green
3
000 – 255
basic brightness of blue
4
000 – 255
basic brightness of white
5
000 – 255
basic brightness of amber
5
000 – 255
basic brightness of UV
Fig. 9
7-channel mode
DMX
channel
DMX
value
Function
1
000 – 255
dimmer 0 % 100 %
2
000 – 255
basic brightness of red
3
000 – 255
basic brightness of green
4
000 – 255
basic brightness of blue
5
000 – 255
basic brightness of white
6
000 – 255
basic brightness of amber
7
000 – 255
basic brightness of UV
Fig. 10
8-channel mode
DMX
channel
DMX
value
Function
1
000 – 255
dimmer 0 % 100 %
2
000 – 255
basic brightness of red
3
000 – 255
basic brightness of green
4
000 – 255
basic brightness of blue
5
000 – 255
basic brightness of white
6
000 – 255
basic brightness of amber
7
000 – 255
basic brightness of UV
8
000 – 010
no stroboscope
011 – 255
stroboscope slow fast
Fig. 11
5 Additional Functions
5.1 Reducing maximum brightness
ofthe spotlight
If the maximum brightness of the spotlight is not
required, the brightness may be reduced to 33 %
of its maximum value. Thus, the brightness can
be set more precisely, because the 255 brightness
levels are available for a smaller brightness range.
1)
Press the button MENU repeatedly until the
display indicates .
2) Press the button ENTER. The display indicates
, , , , or .
3)
Press the button UP or DOWN repeatedly until
the display indicates .
4) Press the button ENTER and then use the but-
ton UP or DOWN to select:
= maximum brightness
= brightness reduced to 33 %
5) To be able to control the spotlight by DMX,
use the button MENU to return to the highest
menu level.
For independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected.
5.2 White balance
The factory setting of the spotlight is such that
the colours red, green and blue – when set to
maximum brightness – result in a specific shade
of white. This shade of white may be changed
to appear warmer or cooler, e. g. to level out the
differences to other spotlights when they are con-
trolled together with PARC-100 / COL.
1)
Press the button MENU repeatedly until the
display indicates .
2) Press the button ENTER. The display indicates
.
3)
Press the button ENTER again. The display now
indicates , or and a number between
025 and 255.
= brightness of red
= brightness of green
= brightness of blue
4)
Use the button ENTER to select the three
setting options one after the other; use the
button UP or DOWN to set the brightness for
the individual colours and thus to create the
shade of white desired.