User manual

18
English
6 System Settings
The following system settings can be changed
via menu item :
6.1 Spotlight / Derby light
configuration
for DMX mode with 27 channels
It is not necessary to change the setting for
the spotlight /derby light configuration
unless the arrangement of lights has been
changed and DMX control of the FXBAR-5SET
with 27 channels is desired.
The controller will automatically recognize
which spotlight/derby light (
1
…
4
) has been
connected to which jack (
1
…
4
) and will
send the control signals to the corresponding
jacks. The number can be found on the rear
of the light and in the figure on page 12.
For the 27-channel mode, this means:
light number
will be controlled via
the DMX channels
➊
1 – 5
➋
6 – 10
➌
11 – 15
➍
16 – 20
If the arrangement of the spotlights /derby
lights has not been changed, the controls for
the lights on the light controller will be in
the same order as the lights at the controller:
CH1 CH 2 CH 3 CH4 CH5 CH 6 CH 7 CH 8 CH9 CH10 CH11 CH12 CH13 CH 14 CH15 CH16 CH17 CH18 CH 19 CH 20 CH21 CH 22 CH 23 CH24
FIXTURE MOVEMENT CUE OVERRIDE CENTER
FIXTURE
GROUP
PRESET CHASE BANK
MANUAL
MUSIC
AUTO
PROGRAM TA P
INSERT
BLACK OUT
STAND-ALONE
MANUAL
REC
MUSIC
BANK COPY
AUTO
DEL
STAND-ALONE 1
STAND-ALONE 2
STANDBY FUNC MODE
STANDBY FUNC MODE
1 2
3
4
5
6
7
8 9 10
11 12 13 14 15 16 17 18 19 20
GOBO COLOUR
32 41
Example 1: Factory-set arrangement
If the arrangement of the spotlights /derby
lights has been changed, automatic redirec-
tion of the control signals will result in a differ-
ent order. In the following example, the lights
2 and 4 have been interchanged:
CH1 CH 2 CH 3 CH4 CH5 CH 6 CH 7 CH 8 CH9 CH10 CH11 CH12 CH13 CH 14 CH15 CH16 CH17 CH18 CH 19 CH 20 CH21 CH 22 CH 23 CH24
FIXTURE MOVEMENT CUE OVERRIDE CENTER
FIXTURE
GROUP
PRESET CHASE BANK
MANUAL
MUSIC
AUTO
PROGRAM TA P
INSERT
BLACK OUT
STAND-ALONE
MANUAL
REC
MUSIC
BANK COPY
AUTO
DEL
STAND-ALONE 1
STAND-ALONE 2
STANDBY FUNC MODE
STANDBY FUNC MODE
1 2
3
4
5
6
7
8 9 10
11 12 13 14 15 16 17 18 19 20
GOBO COLOUR
3 241
Example 2: Order of the controls when the arrange-
ment has been changed and the system
settings remain the same
If the arrangement of the spotlights/derby
lights has been changed and the order of
the controls is to be the same as the order of
the lights, change the settings of the menu
item
:
1) Press the button MENU to select the menu
item . Press the button ENTER. The dis-
play will indicate the submenu item most
recently selected.
2) Use the button  or  to select the sub-
menu item
. Press the button ENTER.
The display will indicate the configuration:
1
1-5
2
6-10
3
11-15
4
16-20
 Channel group
Channels

Spotlights / Derby lights ➊ … ➍
3) The digit on the left starts flashing, i.e.
channel group 1 has been selected. Press
the button  to select the groups one
after the other.
4) To be able to control a different spotlight/
derby light with a channel group, press
the button  repeatedly until the number
of the corresponding light is indicated on
the display.
Example:
CH1 CH 2 CH 3 CH4 CH5 CH 6 CH 7 CH 8 CH9 CH10 CH11 CH12 CH13 CH 14 CH15 CH16 CH17 CH18 CH 19 CH 20 CH21 CH 22 CH 23 CH24
FIXTURE MOVEMENT CUE OVERRIDE CENTER
FIXTURE
GROUP
PRESET CHASE BANK
MANUAL
MUSIC
AUTO
PROGRAM TAP
INSERT
BLACK OUT
STAND-ALONE
MANUAL
REC
MUSIC
BANK COPY
AUTO
DEL
STAND-ALONE 1
STAND-ALONE 2
STANDBY FUNC MODE
STANDBY FUNC MODE
1 2
3
4
5
6
7
8 9 10
11 12 13 14 15 16 17 18 19 20
GOBO COLOUR
3 241
Example 3: Order of the controls when the arrange-
ment of the spotlights / derby lights and
the system settings have been changed
5) Finally press the button ENTER to save the
settings.
6.2 Disabling thewirelessfootswitch
In the factory settings, the wireless footswitch
mode is enabled. To disable the footswitch
mode when the footswitch is not required or
when the FXBAR-5SET changes the mode in-
advertently (e. g. due to interference signals):
1) Press the button MENU to select the menu
item . Press the button ENTER. The dis-
play will indicate the submenu item most
recently selected.
2) Use the button  or  to select the sub-
menu item
. Press the button ENTER.
The display will indicate the current set-
ting.
3) Use the button  or  to enable (on) or
disable (off) the footswitch mode. Press
the button ENTER to save the setting.
6.3 Reset
The factory settings of the FXBAR-5SET can
be found below. In the menu structure on
page14, the boxes containing the factory
settings are printed in bold.
Factory settings
Subject Function Setting
Show program
mode
program number
program
with all effects
program speed S. 80
Colour mode
brightness
red, green and
blue at max.
brightness (255)
stroboscope off (S. 00)
DMX
start address 001
number of
channels
27
System settings
spotlight / derby
light configuration
1 2 3 4
wireless foot-
switch mode
on
auto-off feature
for display
backlight
off
Reset to the factory settings:
1) Press the button MENU to select the menu
item . Press the button ENTER. The dis-
play will indicate the submenu item most
recently selected.
2) Use the button  or  to select the sub-
menu item
. Press the button ENTER.
The display will briefly indicate the firm-
ware version (e. g.
)
before the show
program
is selected.
6.4 Test
A test can be performed to check all LEDs,
lasers and motors:
1) Press the button MENU to select the menu
item . Press the button ENTER. The dis-
play will indicate the submenu item most
recently selected.
2) Use the button  or  to select the sub-
menu item
. Testing will start imme-
diately:
– During the first 30 s, the show programs
will be tested. If music is picked up by
the microphone, the programs will be
music-controlled; if not, they will be
executed automatically.
– After 30 s, the display will go to . All
LEDs and lasers will emit light at maxi-
mum brightness and all motors will run
at maximum speed.
3) To exit the test, press the button MENU.