User manual
14
English
5 Operation
USE ONLY WITH A 250V FUSE
FXBAR-5SET
IR
POWER
LINK
230V~/
50Hz
FUSE
MICROPHONE
SENSIVITY
DMX INDMX OUT
MENU
ENTER
POWER LINK 230V~/50Hz DMX OUT DMX IN
1 2 3 4 5 6 7
MICROPHONE SENSITIVITY
MENU ENTER IR
The control buttons MENU, , and ENTER
are used to select the operating mode and to
make various settings. The menu structure
below shows how to select the modes and
functions by means of these buttons.
Hint: Press the button MENU repeatedly to go to the
highest menu level from any position in the menu
and to select the operating mode without changing
any settings.
5.1 Independent operation
For independent operation, the following
modes are available:
automatic show programs
music-controlled show programs
colour mode with the same adjustable
colour for all spotlights and derby lights,
with or without strobe effect
The menu structure gives an overview of the
programs:
1)
Press the button MENU repeatedly until
the display indicates the desired mode
, or .
2) Press the button ENTER.
3)
When the button ENTER is pressed repeat-
edly in the colour mode, all colours and
the strobe function can be selected one
after the other. Use the buttons and
to adjust the brightness of the colour or
the strobe speed.
4) For the show programs, use the buttons
and to select:
/
= combination of all effects
/
= strobe LEDs only
/
= laser only
/
= spotlights and derby lights
only
5)
Press the button ENTER again and use
the buttons and to select a program
number.
6) For the automatic programs, press the
button ENTER and then adjust the program
speed ( …
).
For the laser programs and spotlight/
derby light programs, press the button
ENTER
ENTER
MENU
MENU
MENU
MENU
ENTER
ENTERENTERENTERENTER
E
M
E
M
E
M
E
ENTER
MENU
MENU
ENTER
MENU
MENU
MENU
MENU
ENTER
M
MENU
E = ENTER
M = MENU
30 s
3s
MENU
ENTER
E
M
E
M
E
M
E
M
E
E
M
E
M
E
E
E
M
E
M
E
M
E
M
E
M
E
M
E
M
E
M
E
M
E
M
E
M
E
M
ENTER
MENU
ENTERENTER
ENTER
ENTER
MENU
ENTER
MENU
ENTER
MENU / MENU / MENU / MENU / M /
MENU /
Auto Program Mode Music Control DMX Mode System SettingsColour Mode Slave Mode
Programs with All Effects All Effects Red 27-Channel Mode
Spotlight/
Derby Light
Configuration
GreenStrobe LED Programs
Strobe LEDs only
9-Channel Mode
Laser Programs Laser only Blue 5-Channel Mode
Spotlight/Derby Light Programs
Spotlights and
Derby Lights only
Auto-off Feature
for Display
(after 30 s)
Wireless
Footswitch
Mode
Reset
Test
Strobe
3-Channel Mode
DMX start address
Program
number
Program
speed
Program
number
Program
speed
Start
address
Program
number
Program
number
Start
address
Start
address
Start
address
Program
number
Program
number
Program
speed
Factory settings
and settings
after reset
Motor
speed
Motor
speed
Program
number
Program number
Program
speed
Menu Structure