Operating instructions

EN
14

Sort the laundry according to the international symbols shown on the label; if this is missing,
sort according to the type of material.
Start to iron the garments that require a lower temperature so as to reduce idle time (the iron
requires less time to warm up than to cool down) and eliminate the risk of burning the fabric.
synthetic, acrylic, nylon, polyester: low temperatures;
wool, silk: medium temperatures;
cotton, linen: high temperatures;
do not iron.
USE

Verify that the plug (13) is disconnected from the socket.
Setthesteamselector(5)to0[Fig.B].
Openthelatch(6).
Set the iron in a position that facilitates filling the water and prevents it from overflowing.
Slowlypourthewaterintothereservoir(11)usingthespecialcup(14)[Fig.C].
Donotexceedthemaximum(MAX)levelindicatedonthereservoir(9).
Closethehatch(6).

Set the iron upright.
Insert the plug (13) in the socket.
Set the temperature according to the type of fabric in line with the international symbols
shownonthelabels;usingtheadjustmentknob(2)[Fig.D].
The plate temperature LED (1) indicates that the iron is warming up.
WaitfortheplatetemperatureLED(1)togooffbeforestartingtoiron.
Consult the table below to select the cortemperature:
Label
garments

material
Temperature
control
synthetics
e.g. viscose, polyester
•
silk, wool
••
cotton, linen
•••