Operating instructions
GB
8
CLEANING AND MAINTENANCE
The heating pad is washable. Refer to the washing symbols on the heating pad label for the
washing instructions.
Do not bleach.
Do not iron.
Do not dry-clean.
WASHING INSTRUCTIONS
Always disconnect the plug and the control socket (5) from the socket (6) before cleaning.
Slightly push down the plug to remove it easily.
MACHINE WASHING
Only the gentle spin cycle is to be used. DO NOT set an additional spin cycle.
DRYING
Set the dryer at a low temperature.
Do not apply pegs on the electrical parts when hanging the heating pad to dry in order
not to damage them.
DO NOT use the heating pad until it is completely dry.
DISPOSAL
The product is packaged in recyclable materials. Dispose of it in compliance with the
environmental protection standards.
The product must be disposed of appropriately, in compliance with European
standard 2002/96/EC. The recyclable materials contained in the appliance must be
recovered so as to prevent environmental pollution. For further information, contact
the local disposal body or the appliance dealer.
ASSISTANCE AND WARRANTY
To request repairs or purchase spare parts, please contact IMETEC’s authorised customer
service centre on the Number below or via the website. The appliance is covered by the
manufacturer’s warranty.
For details, read the attached warranty sheet. Failure to comply with the instructions for use
and maintenance provided in this manual will render the manufacturer’s warranty null and
void.
www. imetec.com
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
Tel. +39.035.688.111 Fax +39.035.320.149
MI000126
0612 (MMYY)