Use Instructions

Page 9 of 46
checked by the manufacturer.
14. Do not use caustic or abrasive cleaning agents to clean the device or electrodes.
15. Do not charge when the patient/subject is wearing the device.
16. Always clean the electrodes after each measurement according to the cleaning instructions.
17. For electrode channels that have persistent problems with signal quality, check the wear of the
electrode coating.
18. The battery used in this device may present a fire or chemical burn hazard if mistreated.
To ensure battery safety,
a. Do not detach or disassemble the battery from the device
b. Replace the battery at the service center designated by the manufacturer
19. Do not excessively pull or overstress the device as it may break the device.
20. Do not sit or place a heavy object on the device.
21. Do not use the device under the environment with strong electromagnetic Interference.
3.3 IT Network
The iSyncWave device is connected to the tablet via Bluetooth. Through the tablet the following
can be done:
a. Control and operate the device
b. Check real time and saved EEG data through iSyncWave app
c. Retrieve and review the EEG data in iSyncWave app
3.4 Explanation of Markings
Symbol
Meaning
Follow instructions for use
Stand-by
Follow manual or operating instructions
Keep dry
Keep away from sunlight