Quick Guide

8
6. Fasten the access control terminal to the
bracket hook.
7. At the bottom of the device
(dotted box as shown in the figure
below), use the L-shape wrench to
tighten the two fastening screws
clockwise.
4 Device Startup
After the device is installed correctly, connect one end of the power adapter
(purchased or prepared) to the mains supply and the other end to the power
interface of the face recognition access control terminal, and then start the
device. The display screen of the outdoor monitor is energized and lights up, and
the live view is displayed on the screen, indicating that the device is started
successfully.