Product Manual

IMD LLC_____________________________________________________ 16
10011-12 04/15
The generator supplies its power to the electrical loads.
 Check the frequency and/or Volt reading.
If the frequency and/or voltage have fallen below their correct operating range:
 CAREFULLY Increase the tractor engine speed until the Hz meter indicates correct
range again.
Switching OFF
 Turn OFF the electrical loads (appliances).
 Set the generator Main Circuit Breaker to the OFF or OPEN position.
 Let the generator and tractor engine run for a few minutes at no-load, to cool internal
parts.
 Set the PTO shaft lever in the tractor to OFF.
 Wait until the PTO shaft and generator have stopped moving and are stationary.
 Switch off the tractor.
 Disconnect and remove the PTO shaft.
 Electrical connections can now be unplugged.
Maintenance, Cleaning, Care
Regular maintenance and cleaning are crucial for optimum performance and safe operation
of the generator.
Before starting maintenance and cleaning work:
 Switch the main circuit breaker to OFF or to the opened position.
 Disconnect and remove the PTO shaft
On completion of maintenance work:
 Re-install all safety devices correctly