Specifications

General Information
IMC Teddy 50 Ranick Drive East Amityville, NY 11701 [phone] [e-mail] www.imcteddy.com
TRDC-30 0919
TRDC
Tray & Rack Dispensers
Project Name:
Consultant:
Item #:
Model #:
Quantity:
Specications
Options
Product Guide
Frame & Body: The frame is constructed of
welded heavy 16GA rust resistant stainless
steel. The body is constructed of type 304 stain-
less steel fully enclosed frame on all sides and
top, with a stainless steel base.
Dispensing Mechanism: The dispensing height
of racks/trays is maintained at a constant level
by using a spring mechanism which guides the
rack platform in tracks by the use of a bearing
mechanism.
Bumpers: Dispenser is equipped with corner
bumpers.
Casters: The dispenser is mounted on (4) 5”
diameter cadmium plated, double bearing
non-marking rubber tired casters, (2) swivel,
and (2) with brakes.
Silverware Dispenser: If required, the dispenser
is furnished with a silverware dispenser, mount-
ed over the frame housing at a slope for easy
access to the contents. Furnished with (8) holes
for inserting round silverware cylinders.
Cylinders: Polypropylene and perforated to al-
low free flow of water, but does not allow flat-
ware to fall through. Cylinders of same design
and measurement are also available in stain-
less steel upon request