Owner Manual

General Information
IMC Teddy 50 Ranick Drive East Amityville, NY 11701 [phone] [e-mail] www.imcteddy.com
BL-70 0919
BL
Standard Duty, Louvered or Solid Shelving
Project Name:
Consultant:
Item #:
Model #:
Quantity:
Specications Product Guide Options
BL Standard Duty Shelving is pro-
duced from 18GA type 300 series
stainless steel. Shelf edges are
turned down 90 degrees and in
45 degrees for safety. Stainless
steel gussets are welded to cor-
ners and secured to posts with
posi-loc screws.
Posts are 1⅝” OD tubes, 16GA
type 300 series stainless steel,
with top caps, and adjustable
stainless steel feet. All shelv-
ing units and components are
NSF-approved and all exposed
surfaces nished brush satin.
For general purpose use for dry
storage or in refrigerators and
freezers.
Easily assembled and adjusted.
Solid surface design permits quick
clean up of spills. Louvers allow
uniform temperature distribution.
Stationary units have stainless
steel posi-grip adjustable foot in-
serts.
Mobile units provided with 5” cast-
ers. See selection guide and infor-
mation.
□ RC-5 - 5’’ Rubber Casters - Standard
□ PCY-5 - 5’’ Poly Casters - Heavy
Duty
□ PCYS-5 - 5’’ S/S Poly Casters -
Heavy Duty
□ PPC-5 - 5’’ Plate Poly Casters -
Heavy Duty
□ GF-2 - Grease Fittings
□ FF-50 - S/S Flanged Feet
□ BAC - Brakes on All Casters
□ RB-10 - Revolving Bumpers
□ CBM-20 - Corner Bumpers
□ BF-40 - S/S Bullet Feet
□ AES - Aeroform Shelves
□ GA-12 - 12GA Upgrade
□ GA-14 - 14GA Upgrade
□ SRE-60 - Shelf Reinforcement (Solid
Only)
□ PLG-70 - Perimeter Ledge
□ SEI-80 - Seismic Earthquake
Shelving
□ WELD - Set-Up & Welded Unit
□ PCAP - Post Caps