D Spec Sheet

General Information
IMC Teddy 50 Ranick Drive East Amityville, NY 11701 [phone] [e-mail] www.imcteddy.com
D
Louvered or Solid Dunnage Rack
Project Name:
Consultant:
Item #:
Model #:
Quantity:
D-50 0919
Specications Product Guide Options
D Dunnage Rack is produced
from 16GA type 300 series stain-
less steel corners fully welded
and ground smooth.
Unit to be supported by 1⅝” OD,
18-8 type 300 series stainless
steel upright posts, and sanitary,
adjustable stainless steel feet for
leveling.
All dunnage racks are NSF ap-
proved.
D units are built heavy duty for
transporting bulky, heavy packages
and for direct storage in dry and re-
frigerated areas.
Easily assembled.
Solid surface design provides easy
access and quick clean up of spills.
Large louvers allow uniform tem-
perature distribution.
Stationary units provided with
stainless steel posi-grip adjustable
foot inserts, attached to posts.
Mobile units provided with 5” cast-
ers. See selection guide and infor-
mation.
□ RC-5 - 5’’ Rubber Casters - Standard
□ PCY-5 - 5’’ Poly Casters - Heavy
Duty
□ PCYS-5 - 5’’ S/S Poly Casters -
Heavy Duty
□ PPC-5 - 5’’ Plate Poly Casters -
Heavy Duty
□ GF-2 - Grease Fittings
□ FF-50 - S/S Flanged Feet
□ BAC - Brakes on All Casters
□ RB-10 - Revolving Bumpers
□ CBM-20 - Corner Bumpers
□ BF-40 - S/S Bullet Feet
□ AES - Aeroform Shelves
□ GA-12 - 12GA Upgrade
□ GA-14 - 14GA Upgrade
□ SRE-60 - Shelf Reinforcement (Solid
Only)
□ PLG-70 - Perimeter Ledge
□ SEI-80 - Seismic Earthquake
Shelving
□ WELD - Set-Up & Welded Unit
□ PCAP - Post Caps
Solid Model (S)
w/ Legs
Louvered Model (L)
w/ Optional Casters