Specifications

General Information
IMC Teddy 50 Ranick Drive East Amityville, NY 11701 [phone] [e-mail] www.imcteddy.com
ES-70 0821
ES
Medium Duty, Louvered or Solid Shelving
Project Name:
Consultant:
Item #:
Model #:
Quantity:
Specications Product Guide Options
ES Medium Duty Shelving is pro-
duced from 16GA type 300 series
stainless steel. Shelf edges are
turned down 90 degrees and in
45 degrees, with stainless steel
gussets welded to corners and
secured to posts with posi-loc
screws.
Posts are 1⅝” OD tubes, 16GA
type 300 series stainless steel,
with top caps, and adjustable
stainless steel feet. All shelving
units and components are NSF
approved and all exposed surfac-
es nished brush satin.
Install in high use areas, or trans-
porting lled cans, jars or bulk food
containers.
Easily assembled and adjusted.
Solid surface design permits quick
clean up of spills. Louvers allow
uniform temperature distribution.
Stationary units have stainless
steel posi-grip adjustable foot in-
serts.
Mobile units provided with 5” cast-
ers. See selection guide and infor-
mation.
□ RC-5 - 5’’ Rubber Casters - Standard
□ PCY-5 - 5’’ Poly Casters - Heavy
Duty
□ PCYS-5 - 5’’ S/S Poly Casters -
Heavy Duty
□ PPC-5 - 5’’ Plate Poly Casters -
Heavy Duty
□ GF-2 - Grease Fittings
□ FF-50 - S/S Flanged Feet
□ BAC - Brakes on All Casters
□ RB-10 - Revolving Bumpers
□ CBM-20 - Corner Bumpers
□ BF-40 - S/S Bullet Feet
□ AES - Aeroform Shelves
□ GA-12 - 12GA Upgrade
□ GA-14 - 14GA Upgrade
□ SRE-60 - Shelf Reinforcement (Solid
Only)
□ PLG-70 - Perimeter Ledge
□ SEI-80 - Seismic Earthquake
Shelving
□ WELD - Set-Up & Welded Unit
□ PCAP - Post Caps
Model #ES-3618-4L
Shown w/ Optional
Casters