SX Spec Sheet

General Information
IMC Teddy 50 Ranick Drive East Amityville, NY 11701 [phone] [e-mail] www.imcteddy.com
SX-60 0919
SX
Extra Heavy Duty, Louvered or Solid Shelving
Project Name:
Consultant:
Item #:
Model #:
Quantity:
Specications Product Guide Options
SX Extra Heavy Duty Shelving is
produced from 14GA type 300
series stainless steel, with dou-
ble-folded shelf edges turned
down 90 degrees and in 180 de-
grees. Stainless steel gussets are
welded to the underside of each
edge of the shelf and secured to
posts with posi-loc screws.
Uprights are 1⅝” OD, 16GA 18-8
type 300 series stainless steel
posts, with welded-in top caps,
and non-removable, sanitary, ad-
justable stainless steel feet. All
shelving units and components
are NSF approved and all exposed
surfaces nished brush satin.
SX shelves are for large institution-
al or commissary or where equip-
ment abuse is likely. It withstands
heaviest loads with years of main-
tenance-free use. Easily assembled
and adjusted.
Solid surface design provides easy
access and quick clean up of spills.
Large louvers allow uniform tem-
perature distribution.
Stationary units provided with
stainless steel posi-grip adjustable
foot inserts.
Mobile units provided with 5” cast-
ers. See selection guide and infor-
mation.
□ RC-5 - 5’’ Rubber Casters - Standard
□ PCY-5 - 5’’ Poly Casters - Heavy
Duty
□ PCYS-5 - 5’’ S/S Poly Casters -
Heavy Duty
□ PPC-5 - 5’’ Plate Poly Casters -
Heavy Duty
□ GF-2 - Grease Fittings
□ FF-50 - S/S Flanged Feet
□ BAC - Brakes on All Casters
□ RB-10 - Revolving Bumpers
□ CBM-20 - Corner Bumpers
□ BF-40 - S/S Bullet Feet
□ AES - Aeroform Shelves
□ GA-12 - 12GA Upgrade
□ GA-14 - 14GA Upgrade
□ SRE-60 - Shelf Reinforcement (Solid
Only)
□ PLG-70 - Perimeter Ledge
□ SEI-80 - Seismic Earthquake
Shelving
□ WELD - Set-Up & Welded Unit
□ PCAP - Post Caps